EN71 vs ASTM F963: What Wooden Toy Buyers Should Know

When sourcing wooden toys for Europe or the United States, product safety compliance is an important part of the purchasing process. Two standards that buyers frequently encounter are EN 71 and ASTM F963.

Although both standards address toy safety, they are used in different regulatory markets and have different requirements. A wooden toy tested to EN 71 is not automatically compliant with ASTM F963, and the reverse is also true.

In this guide, we explain the differences between EN 71 and ASTM F963, the main testing areas, and what importers and brands should confirm with their wooden toy manufacturers before placing an order.

Wooden toys prepared for safety testing and quality inspection
Product safety testing is an important part of wooden toy sourcing.

1. What Is EN 71?

EN 71 is a series of European toy safety standards. It supports the safety requirements of the EU Toy Safety Directive and covers different aspects of toy safety, including mechanical and physical properties, flammability and the migration of certain elements.

For wooden toy buyers, three commonly referenced parts are:

EN 71-1: Mechanical and Physical Properties

This part addresses mechanical and physical hazards. Depending on the product, checks may include sharp edges, sharp points, small parts, structural integrity and other potential hazards during normal use and reasonably foreseeable use.

EN 71-2: Flammability

This part covers flammability requirements for toys. The applicable requirements depend on the type and construction of the toy.

EN 71-3: Migration of Certain Elements

This part addresses the migration of certain elements from toy materials. It is relevant to materials that children may touch or put in their mouths, including applicable painted or coated surfaces.

Not every EN 71 part applies to every wooden toy. The correct testing scope depends on the product design, materials, age group and applicable regulatory requirements.

For the current list of harmonised toy safety standards, buyers should consult the European Commission’s toy safety information.

2. What Is ASTM F963?

ASTM F963 is the Standard Consumer Safety Specification for Toy Safety used in the United States. It covers a wide range of toy-related hazards and product requirements.

In the United States, ASTM F963 is incorporated into the mandatory toy safety requirements under 16 CFR Part 1250. The CPSC identifies ASTM F963-23 as the applicable version for toys manufactured on or after April 20, 2024, subject to the applicable regulatory provisions.

For wooden toys, relevant areas may include:

  • Material quality
  • Mechanical and physical hazards
  • Small parts and choking hazards
  • Sharp edges and points
  • Paint and similar surface-coating materials
  • Applicable chemical and other safety requirements
  • Age grading, warnings and product-specific requirements

The exact requirements and testing methods depend on the toy’s features and the applicable sections of the standard.

For official information, visit the U.S. Consumer Product Safety Commission’s Toy Safety Business Guidance.

Wooden toy product undergoing laboratory safety testing
Laboratory testing should be selected according to the product and destination market.

3. EN 71 vs ASTM F963: Main Differences

The main difference is the regulatory market in which each standard is used. EN 71 is associated with the European toy safety framework, while ASTM F963 is incorporated into the mandatory toy safety requirements in the United States.

ComparisonEN 71ASTM F963
Main marketEuropean UnionUnited States
Standard structureA series of separate partsA comprehensive toy safety specification
Mechanical and physical safetyEN 71-1Applicable mechanical and physical sections
FlammabilityEN 71-2Applicable flammability provisions
Chemical requirementsIncludes EN 71-3 for migration of certain elementsIncludes applicable chemical and material requirements
Regulatory frameworkEU Toy Safety Directive and applicable harmonised standards16 CFR Part 1250 and other applicable U.S. requirements
Market documentationCE marking and relevant conformity documentationChildren’s Product Certificate (CPC), where required

This is a general comparison, not a complete list of legal requirements. The standards are not interchangeable, and individual product requirements may differ significantly.

4. Which Tests Are Important for Wooden Toys?

Wooden toys may contain several materials and components, including solid wood, plywood, paint, coatings, glue, magnets, metal fasteners and plastic accessories. The testing plan should reflect the complete product rather than looking only at the wooden parts.

Mechanical and Physical Testing

Depending on the product, testing may examine:

  • Small parts and potential choking hazards
  • Sharp points and sharp edges
  • Strength and structural integrity
  • Accessible moving parts
  • Potential hazards created during use or foreseeable misuse

Chemical Testing

Testing may be needed for paint, coatings, wood materials, adhesives and other accessible components. The applicable chemical limits and test methods depend on the destination market and product requirements.

Flammability Testing

Flammability requirements should be reviewed according to the toy’s materials, design and applicable standard. Do not assume that every wooden toy requires exactly the same flammability tests.

Product-Specific Testing

Toys with magnets, electrical components, cords, projectiles or other special features may have additional requirements. A wooden puzzle, a wooden dollhouse and a wooden pull-along toy should not automatically be assigned the same testing plan.

5. Do Wooden Toys Need Both EN 71 and ASTM F963?

It depends on the intended markets.

If a product is sold only in the European Union, the manufacturer and responsible economic operators should assess the applicable EU toy safety requirements and relevant harmonised standards.

If the product is sold in the United States, the applicable U.S. requirements must be assessed, including ASTM F963 as incorporated into 16 CFR Part 1250, as well as other applicable federal requirements.

If the same wooden toy is sold in both markets, buyers may need to arrange testing and documentation for both regulatory systems.

Having a test report for one market does not automatically prove compliance in another market. Buyers should ask the testing laboratory to confirm which requirements are covered by each report.

6. What Documents Should Buyers Request?

Before placing an order, importers and brand owners should confirm which documents are available and which are required for their destination market.

For the European Market

  • Relevant EN 71 test reports, where applicable
  • EU Declaration of Conformity
  • Technical documentation supporting the conformity assessment
  • Product identification and required warnings or instructions
  • CE marking in accordance with applicable requirements

For the United States

  • Applicable ASTM F963 test reports
  • Children’s Product Certificate (CPC), where required
  • Applicable CPSIA-related test reports and documentation
  • Tracking label information, where required
  • Product identification and applicable warnings

For children’s products subject to applicable CPSC rules, third-party testing by a CPSC-accepted laboratory and certification may be required. The U.S. importer is generally responsible for issuing the CPC for imported products.

See the CPSC Toy Safety FAQ for more information about testing and certification.

7. How to Work with a Wooden Toy Manufacturer on Compliance

Choosing a manufacturer that understands your product requirements can make the sourcing process more efficient. However, buyers should provide clear information before production begins.

We recommend discussing the following points:

  • Destination market: Confirm whether the products are intended for Europe, the United States, Australia or other markets.
  • Age grading: Specify the intended age group and product use.
  • Product specifications: Share drawings, dimensions, materials, colors and component details.
  • Testing scope: Confirm the applicable standards and tests with a qualified laboratory.
  • Sample approval: Approve the product sample before mass production.
  • Change control: Review whether changes to paint, materials, components or suppliers affect the existing test documentation.
  • Documentation: Confirm who will arrange testing and who is responsible for the required market documentation.
Wooden toy manufacturer checking product quality before shipment
Product specifications and quality checks should be agreed before mass production.

8. Quality Control at Ronghong

Ronghong has more than 20 years of experience in wooden toy manufacturing. We work with international customers on educational toys, puzzles, building blocks, role play toys and customized wooden products.

For each project, we discuss product specifications, materials, finishing, packaging and destination market requirements with the customer.

Our cooperation process can include:

  • Reviewing customer drawings and product requirements
  • Discussing suitable materials and product construction
  • Developing samples for customer approval
  • Checking production workmanship and assembly
  • Coordinating applicable product testing
  • Checking packaging and shipment requirements

Learn more about our wooden toy quality control process, wooden toy manufacturing process and factory background.

Frequently Asked Questions

Is EN 71 the same as ASTM F963?

No. EN 71 is a series of European toy safety standards, while ASTM F963 is a toy safety specification incorporated into U.S. federal toy safety requirements. They have different structures and regulatory applications.

Can an EN 71 test report be used for the U.S. market?

Not as automatic proof of U.S. compliance. The product must be assessed against applicable U.S. requirements, including the relevant provisions of ASTM F963 and other applicable rules.

Does ASTM F963 apply to wooden toys?

Yes, when a product is classified as a toy subject to the U.S. toy safety requirements. The applicable sections depend on the product’s design, materials and features.

Does every wooden toy need EN 71-1, EN 71-2 and EN 71-3?

Not necessarily. The applicable testing scope depends on the toy and the relevant regulatory requirements. A qualified testing laboratory can help determine which parts and tests apply.

Who is responsible for toy safety certification?

Responsibilities depend on the market and supply chain. In the United States, the domestic manufacturer or importer responsible for the children’s product generally issues the CPC where required. In the EU, the manufacturer has responsibilities for conformity assessment, technical documentation and the EU Declaration of Conformity. Buyers should confirm their own legal responsibilities for each market.

Conclusion

EN 71 and ASTM F963 are both important references for wooden toy safety, but they serve different regulatory markets. Buyers sourcing wooden toys for Europe and the United States should identify the applicable requirements before production and arrange the correct testing and documentation.

Working closely with your manufacturer, testing laboratory and compliance team can help reduce avoidable problems during product development and market entry.

If you are developing wooden toys for your brand or retail business, contact Ronghong to discuss your product specifications and manufacturing requirements.